Warn® Powerplant 9.5
Winch and compressor in one compact unit
  Warn® Warn® Powerplant HP  

The WARN PowerPlant 9.5 combines a powerful winch with a high-performance air compressor for the ultimate vehicle-mounted multi tool. The PowerPlant 9.5 has a pulling capacity of 9,500 lbs. and is equipped with a powerful air compressor that can air up four 35" tires in eight minutes and even run air tools. With additions such as stainless steel fasteners, a pressure switch, a revised contactor, and a hose and accessories, the PowerPlant is better than ever.

  • Series-wound motor with thermal protection shutoff switch.
  • Three-stage planetary gear train for smooth, efficient operation.
  • Extreme duty winch sealing for superior water resistance.
  • Stainless steel fasteners for exceptional corrosion protection.
  • Wire rope with roller fairlead (125' of 5/16").
  • Mechanical brake for reliable operator control while winching.
  • Improved contactor control for great reliability and long duty cycles.
  • Pressure switch limits maximum/minimum air pressure in reservoir.
  • Intercooler/air reservoir reduces compressed air temperature. Half-gallon air reservoir helps even airflow.
  • High-output air compressor delivers 5 CFM @ 90 PSI; maximum air pressure is 100 PSI.
  • Air outlet/hose connection works with quick-connect couplers.
  • Hand-held control for operation of both winch and compressor. LED provides feedback on motor temperature.
  • Accessory kit includes a more durable and flexible 20' (6.1m) air hose; quick-connect couplers; WARN-branded tire pressure gauge and dual air chuck; and sturdy carry bag.
  • Corrosion-resistant flat-black finish.
Warn 91800
Warn® Powerplant 9.5 Specs
Winch Model: PowerPlant 9.5
Part Number: 91800 (12V)
Rated Line Pull: 9,500 lbs. (4310 kgs) single-line
Motor: Series-wound 4.6 hp 12V, with thermal protection shutoff switch
Electrical controls: Contactor
Remote Control: Remote switch with thermometric LED and 12' (3.7m) lead
Gear train: 3-stage planetary
Gear ratio: 156:1
Clutch (freespooling): Sliding ring gear
Brake: Automatic mechanical cone brake
Wire rope: 125' of 5/16" (38m of 8mm diam.)
Fairlead: Roller
Recommended battery: 650 CCA minimum
Battery leads: 2 gauge, 72" (1.83m)
Finish: High-gloss black powdercoat
Drum diameter/Length: 2.5"/9" (6.4cm/23cm)
Weight: 100 lbs (45 kgs)
Air Reservoir: 1/2 gallon tank with Integrated Air Intercooler
High Air Flow Rating: 12 CFM @ 0 psi, 5 CFM @ 90 psi
Max Air Pressure: 100 psi
Air Pressure Switch: Yes
Air Hose: 20', with quick-disconnect. Brass air fittings and couplings

Line Pull
Line Speed
Pull by layer
0 28.8 (8.78) 94 amps 1/9500 (4313)
2000 (910) 16.4 (4.50) 165 amps 2/8650 (4927)
4000 (1810) 12.3 (3.75) 238 amps 3/7920 (3595)
6000 (2720) 9.5 (2.90) 307 amps 4/7400 (3359)
8000 (3630) 7.5 (2.29) 383 amps 5/6940 (3150)
9500 (4310) 6.2 (1.89) 451 amps

Above performance specs are based on first layer of drum
Remember All Prices Are Canadian Funds Canadian Flag
Copyright © 2009 Softys Speed Shop. All rights reserved.