Access® Truck Bed LED Light
Lights Up Dark Areas
       
 
Access® Truck Bed LED Light
   
  Use our Access® Truck Bed LED Light to light up dark areas in boats, SUV’s, campers or anywhere a 12V power source is located. It easily attaches to the power source with only two wires and it is completely waterproof. The built in on/off switch allows for access where the light is installed.
 
 

Easy To Install - Just Peel, Stick & Attach Wires!

For best adhesion air and surface temperature should be above 60° F.

  1. Clean area where LED light is to be attached with soap and water or rubbing alcohol and wipe dry.
  2. Peel protective layer from adhesive strip and attach.
  3. Connect RED wire to a 12V positive source.
  4. Connect BLACK wire to ground.
 
 
12” LED Light Strip
12” LED Light Strip
Mounts to surface with 3M adhesive. Light is completely waterproof.
   
 
Mounting The Light Mounting The Light
Light can be mounted at the front or rear of the truck bed, or wherever a 12V power source is located.
 
Complete
Kit
39.95
 
Built-in On/Off Switch Built-in On/Off Switch
Allows for the light to be turned on and off where the light is installed.
   
       
       
 
       
Remember All Prices Are Canadian Funds Canadian Flag
Copyright © 2009 Softys Speed Shop. All rights reserved.