VHT Epoxy Plate Finish
Epoxy Plate Finish
  • Auto Trim
  • Bumper Touch up
  • Head Light Bezels
  • Hub Caps
  • Mirror Housings
  • Lug Nuts
  • Custom Wheel Centers
  • Steering Columns
  • Door Handles
  • Dash Panels
  • Gauge Bezels


Please call for price and availability
VHT SPRAY PLATE FINISHES PLUS is a unique quick-dry formula that produces a plate like finish. When a high gloss metallic finish is desired, this product is the closest to a plate finish that is attainable in an aerosol can. Excellent for touch-up or refinishing sealed metal, plastic or wood. VHT plate finishes are a blend of high gloss epoxy resins and finely ground metals that produce a brilliant finish. Rust inhibitors are added to act as a barrier against corrosion. This unique epoxy enamel is non-tarnishing and can be used on exterior and interior applications.
Epoxy Plate Finish is available
in these colors:

SP-525-1 Chrome
SP-525-4 Bright Gold
SP-525-5 Anodized Bronze

How To Apply:

For best results on all surfaces, prime the substrate with white VHT SANDABLE PRIMER (Product # SP-301). This will seal the surfaces and accent the color of the finish coat. Sand the surfaces to remove all gloss, rust and dirt. Apply VHT SANDABLE WHITE PRIMER in light even coats sanding between coats with a lightweight sandpaper before applying the finish coat. Shake can for one minute after marble is heard. Hold the can 12 to 16 inches from the surface being painted spraying in long even coats until a smooth even color is achieved. Allow 20 minutes between coats. Apply the final coat 8 to 10 inches from the surface following the wet pattern of the spray from top to bottom being careful not to run the final coat. Buff the painted surface with a gloss wax in about 15 days to enhance the luster of the finish.

Remember All Prices Are Canadian Funds Canadian Flag
Copyright © 2009 Softys Speed Shop. All rights reserved.